There are many reasons that a home owner may want to re-shingle a roof. For instance, if the house has been built for quite some time, the roof may suffer from the normal wear and tear which is greatly affected by the weather. Also, the roof structure of the house may have become damaged and would leak on rainy days.
This may also be a result of the normal wear and tear of a roof. It could also be that the home owner simply wants to remodel the exteriors of the house. No matter what the reason may be, a home owner is inclined to hire a professional roofer for the job. You may be intimidated even just thinking about the job as re-shingling a roof may have the impression of being time-consuming and demands exhaustive labor.
However, it is noteworthy to know that re-shingling a roof is actually a work that can be done by anybody just as long as they are equipped with the right tools and the sufficient knowledge on how to apply new shingles.
This first thing to do is remove or repair rotting boards or even the damaged roof structure itself. Be wary of loose as well as protruding nails and drive them down, if not totally remove them. Still, if you are considering about applying new shingles over the old ones, be sure to keep the old shingles secure first and smooth out the surface or appearance with the use of feathering strips.
Once done, lay down roofing felt paper over your old roof shingles. In order to make the roof more long-lasting and durable enough to withstand the weather even for a long period of time, make sure to overlap each felt paper, preferably by two inches. After which, secure the hold of the felt paper by stapling them to the roof structure.
Put in your starter strip at the bottom part of the roof. Make sure that this is sticking out or is protruding in excess of approximately five by eight inches over the eaves and gable of your roof.
Once done, mark the center of your roof with a chalk. Your first shingle should be centered at the chalk line. Make use of a nail gun in securing the shingle into its place.
Put down the initial course of the shingles. Starting at the base or bottom part of the shingle, measure about five inches upwards. Drive in four nails in this area, following a straight line. Be sure to put the nails from one end of a shingle to the next in order to secure it.
Carry on with this process until you have secured each shingle in both directions. When done, start the next course of the shingles. It will be helpful to use chalk in applying shingles and to drive in nails in straight rows and not in angles in order to prevent leaks. Go on with the process until you have arrived at the ridge of the roof. Once you have completed one side of the roof, do the other side following the same method.
Warning: include(): http:// wrapper is disabled in the server configuration by allow_url_include=0 in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149
Warning: include(http://www.realestateproarticles.com/catads/cat275.php): failed to open stream: no suitable wrapper could be found in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149
Warning: include(): Failed opening 'http://www.realestateproarticles.com/catads/cat275.php' for inclusion (include_path='.:/usr/local/php56/pear') in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149