Real Estate Pro Articles
   
   

How To Install Replacement Windows in 6 Easy Steps



[Valid RSS feed]  Category Rss Feed - http://www.realestateproarticles.com/rss.php?rss=275
By : Alex Foster    99 or more times read
How to install replacement windows is the most common question that we usually encounter if we want to start renovating or changing our window. Improving our home reflects the kind of personality we have and the windows are very important for us to mind because it is where sunlight and air comes in. Here are some few simple steps on how to replace your window.

It will be a good idea if you could find an already finished frame then you have to spend time in planning what do you want to do with your window, same with looking for the right quality tools and equipments for you to do the job right.

  1. First in installing your window it is very important that you should take measurement first before doing anything. Measuring each side of the window will do the trick. This is for you to know what would be the precise length and width of your replacement window.

  2. The next thing you do after taking measurements is to take is take down the window itself so you could start rebuilding your new window. Remove everything from your old window frame down to its bars and wires but make sure to keep its internal and external castings intact.

  3. After taking down your old window, it is now time that you should prepare the next window frame that you have to put. But be careful when doing this job, you donít have to start all over again if you mishandled your equipments.

  4. Next is insulation preparation for your next windows. You can use polyurethane foam for your window insulation.

  5. This time you have to drill carefully through your new frame at each end and at the center after applying spray foam. Let it harden first before drilling and scrape off excess hardened foams.

  6. Lastly, this is the part where you have to put on your new window frame, install it and fasten it carefully to where you removed the previous frame. Test if it fits properly and screw it in place so it will not fall off. This is the same part where you will have to paint it to what color or design you want for your new window.

This is the 6 simple steps on how to install replacement windows for you. Go ahead and install your windows without paying others to do the job.


Related Articles



Actions
Print This Article
Add To Favorites



Sponsors


Warning: include(): http:// wrapper is disabled in the server configuration by allow_url_include=0 in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149

Warning: include(http://www.realestateproarticles.com/catads/cat275.php): failed to open stream: no suitable wrapper could be found in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149

Warning: include(): Failed opening 'http://www.realestateproarticles.com/catads/cat275.php' for inclusion (include_path='.:/usr/local/php56/pear') in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149
 

 

© All rights reserved to Real Estate Pro Articles