Real Estate Pro Articles
   
   

Homemade Solar Panel: Some Great Tips



[Valid RSS feed]  Category Rss Feed - http://www.realestateproarticles.com/rss.php?rss=281
By : Roby Hicks    99 or more times read
You can make solar panels at home. This is a great idea because Mother Nature needs all the help it can have to get better. Energy consumption is one of the biggest culprits why our environment is in such bad shape. Using of solar panels will greatly reduce this as pollution brought by burning energy fuels will also be reduced.

There are several DIY projects for making solar panels at home. There are several attempts to make DIY solar panels because they are expensive. Their installation is expensive too. You can create solar panels at home using the tips below. They may not be able to produce enough for the entire home. However, you can create several to produce enough power to light a room at home or to power an appliance at home.


The materials:

The first thing you need to do is to prepare the materials. You will need copper sheets for this. See to it that they are clean. Remove anything that may be on the sheet before starting. You will also need container. You can use glass or plastic. What is important is that their mouth is wide open. You will also need a metal cutter, electric burner, water, salt, alligator clips and power meter.

The steps:

  1. Prepare the copper sheet. After cleaning it, cut it into appropriate sizes. You can cut them in square or rectangular shape. This will depend on the shape of the electric burner. It is important that the sheet fits the burner perfectly. This will ensure that the entire burner will be able to heat the entire sheet. Heat the sheet for about 30 minutes, or until the cupric oxide forms.

  2. Remove the cupric oxide from the copper sheets. To do this, you have to wait for the sheet to cool down. Once it does, scrape the dark layer off. You can also use a brush. Just be careful not to remove the red layer because it is needed for this project.

  3. Prepare another copper sheet. Cut it in a similar shape with the first sheet and clip it on the jar together with the first sheet.

  4. Prepare the glass or plastic jar. Using the clips, attach the copper sheets on the jar. Put the sheets inside the jar. They should not be touching each other and each sheet should follow the shape of the container. Pour water and salt solution once the sheets are in place. The water should only be touching the bottom of the sheets.

  5. Collect solar power. Place the panel under the heat of the sun. To see if it is collecting energy, attach a power meter.

Using the solar energy is helpful in improving the current state of our environment, as this is environmentally friendly. However, solar panels used to generate solar panels are expensive. Their installation is very expensive as well. If you cannot afford solar panels at this time, you can create your own by following DIY projects online. They may not generate enough power for your entire home but you can have enough to power an area of your home or to power a device.
Check out the Goodyear Real Estate. Visit the Goodyear Luxury Homes and the Goodyear Golf Homes as well.

Related Articles



Actions
Print This Article
Add To Favorites



Sponsors


Warning: include(): http:// wrapper is disabled in the server configuration by allow_url_include=0 in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149

Warning: include(http://www.realestateproarticles.com/catads/cat281.php): failed to open stream: no suitable wrapper could be found in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149

Warning: include(): Failed opening 'http://www.realestateproarticles.com/catads/cat281.php' for inclusion (include_path='.:/usr/local/php56/pear') in /home/onlineb1/public_html/realestateproarticles/inc/extra_rlinks.inc.php on line 149
 

 

© All rights reserved to Real Estate Pro Articles